IR finite one-loop box scalar integral with massless internal lines

The IR finite one-loop box scalar integral with massless internal lines has been recalculated. The result is very compact, simple and valid for arbitrary values of the relevant kinematic variables. It is given in terms of only two dilogarithms and a few logarithms, all of very simple arguments. Received: 31 January 2002 / Published online: 26 April 2002     

燃煤循环流化床燃烧脱硫的模型预测

燃煤循环流化床燃烧脱硫的模型预测池涌，岑可法，倪明江Ｐ·Ｂａｓｕ（浙江大学能源系杭州３１００２７）关键词：循环流化床，燃烧，脱硫，模型预测一、引言循环流化床锅炉在过去十几年中得到了广泛的应用，但与此同时由于循环流化床内流体动力特性的高度复杂使得数学模...     

取代对苯二酚醚化物的合成研究

本文从取代的对苯三酚３出发、利用Ｗｉｌｌｉａｍｓｏｎ醚化反应合成了一系列它的醚化产物４ａ－４Ｈ，给出了它们的核磁共振数据（氢谱和碳谱）。讨论了影响醚化反应的一些因素，比较了不同烷化剂发生醚化反应的活泼性。     

一类非线性弹簧振子的周期性振动

本文用数值计算的方法讨论了一类非线性弹簧振子的周期性振动及其特点．     

Optical investigation of cavitation erosion by laser-induced bubble collapse

By means of a new force sensor based on optical beam deflection (OBD), the mechanical effects of laser-matter interaction underwater at different incident laser energy are investigated in detail. The experimental results show that a target underwater is impacted in turn by laser-plasma ablation force and high-speed liquid-jet impulse induced by bubbles collapse in the vicinity of a solid boundary. Furthermore, the amplitudes of the two forces increase monotonously with laser energy. According to the ablation force detected by the experiment and the theoretical relationship between laser intensity and ablation pressure, the value of liquid-jet impact against a solid boundary can be easily obtained. In addition, based on the model of a collapsing bubble, some characteristic parameters, such as the liquid-jet impact velocity, the maximum bubble radius, the bubble energy can also be obtained at different laser energy, which are valuable in the corresponding research fields.     

Theoretical study on line source laser-induced surface acoustic waves in two-layer structure in ablative regime

The generation of ultrasound in film–substrate system by a laser line source is studied in the case of ablation mechanism, which can be realized by adding a liquid layer at the excitation point. The time domain displacement can be yielded by the numerical jointed inversed Laplace–Fourier transformation technique. The typical surface acoustic waves (SAW) of two layer structures, slow film on fast substrate and fast film on slow substrate, are obtained and the effect of the propagation distance and the thickness of the film on the SAW are given.     

SiGe (Ge-dot) heterojunction phototransistors for efficient light detection at 1.3–1.55 μm

The aim of this work is to develop a Si/SiGe HBT-type phototransistor with several Ge dot layers incorporated in the collector, in order to obtain improved light detectivity at 1.3–1.55 μm. The MBE grown HBT detectors are of n–p–n type and based on a multilayer structure containing 10 Ge-dot layers (8 ML in each layer, separated by 60 nm Si spacer) in the base-collector junction. The transistors were processed for normal incidence or with waveguide geometry where the light is coupled through the edge of the sample. The measured breakdown voltage, BV_ceo, was about 6 V. Compared to a p–i–n reference photodiode with the same dot layer structure, photoconductivity measurements show that the responsivity is improved by a factor of 60 for normal incidence at 1.3 μm. When the light is coupled through the edge of the device, the detectivity is even further enhanced. The measured photo-responsivity is more than 100 and 5 mA/W at 1.3 and 1.55 μm, respectively.     

镁掺杂对In2O3电导和气敏性能的影响

用共沉淀法制备了Mg2 + 掺杂的In2 O3 纳米粉 ,研究了镁掺杂对In2 O3 电导和气敏性能的影响 .结果表明 :MgO和In2 O3 间可形成有限固溶体In2 -xMgxO3 (0≤x≤ 0 .40 ) ;MgIn× 电离的空穴对材料导带电子的湮灭 ,使掺镁纳米粉的电导变得很小 ;n(Mg2 + )∶n(In3 + ) =1∶2共沉淀物于 90 0℃下热处理 4h ,用所得的纳米粉制作的传感器在 32 0～ 370℃下 ,对 45 μmol/LC2 H5OH的灵敏度达 10 2 .5 ,为相同浓度干扰气体Petrol的 12倍多 .     

3族新的不含紧优与几乎紧优的有向双环网络无限族

给出了3族新的不含紧优与几乎紧优的有向双环网络.     

Epoxy resin containing polyphenylsilsesquioxane: Preparation,morphology, and thermomechanical properties

Polyphenylsilsesquioxane (PPSQ) was incorporated into an epoxy resin to prepare organic–inorganic composites, and two strategies were adopted to afford composites with different morphologies. Phase separation induced by polymerization occurred in the physical blending system. However, nanostructured composites were obtained when a catalytic amount of aluminum triacetylacetonate was added to mediate the reaction between PPSQ and diglycidyl ether of bisphenol A (DGEBA). The intercomponent reaction significantly suppressed the phase separation on the micrometer scale. Organic–inorganic composites with different morphologies displayed quite different thermomechanical properties. Both differential scanning calorimetry and dynamic mechanical analysis showed that the nanostructured composites possessed higher glass‐transition temperatures than the phase‐separated composites with the same loading of PPSQ, although the intercomponent reaction between PPSQ and DGEBA reduced the crosslinking density of the epoxy matrix. This result was ascribed to the presence of nanosized PPSQ domains in the nanostructured composites, which acted as physical crosslinking sites and thus reinforced the epoxy networks. The nanoreinforcement of the PPSQ domains afforded the enhanced dynamic storage modulus for the nanostructured composites in comparison with the phase‐separated composites with a PPSQ concentration less than 15 wt %. In terms of thermogravimetric analysis, the organic–inorganic composites displayed improved thermal stability and flame retardancy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1093–1105, 2006